BASIC– CPCCLRG3001A LICENCE TO PERFORM RIGGING BASIC LEVEL
INTERMEDIATE– CPCCLRG3002A LICENCE TO PERFORM RIGGING INTERMEDIATE LEVEL
ADVANCED– CPCCLRG4001A LICENCE TO PERFORM RIGGING ADVANCED LEVEL
Our Rigging Courses are nationally recognised that will give you the knowledge and skills to safely construct framework in different working environments. Build up from basic to advanced levels and get more complex skills.
Our Rigging Courses Brisbane cover outcomes required to perform basic, intermediate and advanced rigging work associated with movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane, rigging of gin poles, flying foxes and cable ways, fabricated hung scaffolds and cantilever crane loading platforms for licensing purposes.
Our Trainers and Assessors have a wealth of knowledge that comes from years of experience in the industry and will prepare you for life in the work force. Our highly skilled and friendly trainers will conduct the scaffolding course in a way that makes you feel comfortable, confident and ready to get a job in the Rigging industry. We strive to provide real work conditions and teach you how to keep yourself and others safe.
The course will teach you how to plan, select and inspect equipment, set up tasks, erect and dismantle structures and plant. You will also learn about:
- WHS/OH&S licensing legislation
- Hazard prevention and control methods
- Identifying appropriate communication methods
- Methods of applying temporary connections using fibre ropes
- Ability to check ground suitability
- Temporary guys, ties, propping and shoring, including flexible steel wire rope and tubing, are connected where required
- Completion of handover certificates
- Tagging and isolation of damaged rigging equipment
Basic Level - work associated with movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms
Intermediate Level - all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts
Advanced Level - all the outcomes for rigging work at the basic and intermediate levels, and also includes rigging of gin poles and shear legs, flying foxes and cable ways, guyed derricks and structures, and suspended scaffolds and fabricated hung scaffolds.
This is a 5-day course involving high quality face to face training at our training facility in Pinkenba, QLD.
Onsite training and assessing is available at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the WHSQ requirements for assessment.
Basic Level (CPCCLRG3001A) - You must hold a valid Dogging (DG) High Risk Work Licence or Notice of Assessment. Intermediate Level (CPCCLRG3002A) – You must hold a valid Basic Rigging (RB) High Risk Work Licence or Notice of Assessment. Advanced Level (CPCCLRG4001A) – You must hold a valid Intermediate Rigging (RI) High Risk Work Licence or Notice of Assessment .
You will also be required to produce 3 forms of identification which should include a current photo ID. ID requirements can be found by visiting https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity We would also require the candidates to wear basic PPE such as hi-vis, safety helmet, boots (preferably steel capped) and wear sun protectionduring the training.
Any medical problems or health conditions are required to disclosed beforetraining commences.
50% of the course cost is to be paid at the time of the booking and the balance is payable prior to the commencement of formal assessment.
All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonored transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.
You can find more information about enrolment and payment policies in student handbook.Refund Policy
Kindly refer to our student handbook for more information on our refund policy.
Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life high risk jobs.
On successful completion:
- Depending on the course level completed (basic, intermediate or advanced) you will be issued with a Statement of Attainment (SOA) for the specific unit of competency.
- LHRW Assessment Summary – AS1 form to apply for your High Risk Work Licence through Workplace Health and Safety Queensland
- Industry knowledge and skills to perform rigging tasks.
For further information you can contact us on 07 3865 4926 or email us at firstname.lastname@example.org