FORKLIFT LICENSING

FORKLIFT COURSE

*$325

*for students eligible for funding under the Construction Skills Queensland (CSQ) program initiative

Courses available weekly

Call now while funding is still available

TLILIC0003 Licence to operate a forklift truck

Our Forklift Operations Course covers the functions required to prepare and operate a forklift truck to the standards set by Workplace Health and Safety Queensland/WorkCover Queensland. This unit involves planning tasks for working conditions, using the controls and operating systems to manage the operation of the equipment, locating the load and identifying the load characteristics, safely moving the load, monitoring the controls and stopping, shutting down and securing the equipment after the completion of operations.

Forklift operations require a High-Risk Work Licence (HRWL) issued by Work Place Health and Safety QLD (WHSQ). Ascent Training Solutions has developed a high-quality detailed training course that prepares you to perform the operations of a forklift with high importance on safety.

Ascent Training Solutions’ Forklift Truck course will give you the practical skills and knowledge necessary to safely operate a forklift truck while complying with all legislation requirements. This course is based on the National Standard for Licensing Persons conducting high risk work.

A Forklift truck is a powered industrial truck that can be used to transfer materials over short distances. It is equipped with lifting media made up of a mast and an elevating load carriage, attached to that is a pair of fork arms or other arms that can be raised above the ground, 900 mm or more. A forklift does not include a pedestrian-operated truck or a pallet truck.

The training in its current form meets the standards specified in the state and territory licencing and unit of competency requirements.

Operating a forklift truck, firstly, involves the planning and preparation of the job followed by the task to be undertaken and finally the shut down procedures associated with the forklift.  All of these activities will be taught by our highly qualified trainers through written and practical teachings at our on-site training facility in Brisbane. The course content will include, but not limited to the following aspects;

  • Identifying work orders, assessing the work area and conducting site inspections relevant to workplace procedures
  • Determining working load limits
  • WHS/OHS legislation, codes of practice and standards to comply with
  • Reporting hazard identification and control measures relevant to workplace procedures
  • Site-specific traffic management plans
  • Safe working procedures such as clear and concise workplans and environmental conditions
  • Pre-start, operational and shut-down checks of the forklift
  • Understanding manufacturer's instructions and specifications of the forklift and associated logbooks.
  • Monitoring the weight and positioning of loads to avoid workplace hazards
  • Communication procedures such as signage, hand signals and written instructions along with the importance of communication between co-workers in the workplace

On Successful completion of this unit, you will have the skills to demonstrate the following;

  • Apply safe operating procedures from traffic management plans put in place
  • Conduct visual inspections and carry out routine maintenance checks of a forklift
  • Record and report all relevant information regarding the maintenance and operations of the forklift truck
  • Understand the requirements of the relevant Health and Safety organisations, regulations and safe working procedures
  • Conduct before and after operational checks and shut-down procedures to ensure the safe operations of a forklift truck and isolate any defective equipment
  • Identify appropriate lifting attachments to complete various tasks
  • Communicate effectively in the workplace with supervisors and co-workers and ensure appropriate methods of communication such as hand signals, signage and two-way radios are adhered to
  • Driving, positioning and manoeuvring a forklift safely in forward and reverse gears and knowing its capabilities and characteristics

All aspects of this course are essential in completing your Forklift Truck training. On successful completion of this course, you will be issued with a nationally recognised Statement of Attainment for TLILIC0003 Licence to operate a forklift truck, which enables you to be eligible to apply for the HRWL licence through Workplace Health and Safety Queensland (WHSQ).

Our highly accredited trainers at Ascent Training Solutions will ensure you receive the highest level of training necessary to gain employment in various industries including construction, warehousing, manufacturing and much more.

This is a 5-day course involving high quality face to face training at our training facility in Pinkenba, QLD.

Onsite training and assessing is available at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the WHSQ requirements for assessment.

There are no pre-requisites for this course however, to undertake formal assessment and obtain a HRWL you must be at least 18 years of age and be proficient (read and write) with basic English.

You will also be required to produce 3 forms of identification which should include a current photo ID. ID requirements can be found at https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity )

We would also require the candidates to wear basic PPE such as hi-vis, safety helmet, boots (preferably steel capped) and wear sun protection during the training.

Any medical problems or health conditions are required to disclosed before training commences.

A $200 non-refundable booking fee is to be paid prior to the course to secure your spot. Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life high risk jobs.

On successful completion:

  • You will be issued a Statement of Attainment for TLILIC0003 Licence to operate a forklift truck making you eligible for a LF class HRWL license.
  • LHRW Assessment Summary – AS1 form to apply for your High Risk Work Licence through Workplace Health and Safety Queensland
  • Industry knowledge and skills to perform the operation of a forklift.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

FORKLIFT TRUCK

Browse here to get more information about Grader Operations Course

 

Our other related courses are:

Rigging Courses Brisbane, Dogman Course Brisbane, Scaffolding Course Brisbane

SCAFFOLDING COURSES BRISBANE

This white card course supports the attainment of the basic OHS knowledge required prior to undertaking designated work tasks within any of the construction industry sectors. It demonstrates personal awareness of OHS legislative requirements, and the basic principles of risk management and the prevention of injury and illness in the construction industry.

Scaffolding Course Brisbane - CPCCWHS1001 Work Safely

Scaffolding Course Brisbane

If you wish to carry out construction type work anywhere in Australia, then you must hold a general construction induction card which is commonly known as a ‘white card’.

Course content includes the following:

 

  • Identify OHS legislative requirements
  • Identify construction hazards and control measures
  • Identify OHS communication and reporting procedures
  • Identify OHS incident response procedures

 

Please click here to download a pdf of the complete course outline.

On successful completion of this course, you will be issued with a general construction induction card (white card) and a Statement of Attainment CPCCWHS1001 Work safely in the construction industry.

Discover here to get more information about Forklift Licensing

 

Other Related Courses are:

Riggers Ticket Brisbane, Dogman Ticket Brisbane, Scaffolding Ticket Brisbane,
Scaffolding Ticket Gold Coast

DOGGING COURSES

Dogging operations cover work in conjunction with cranes using slinging techniques, selection and inspection of lifting gear and directing the crane operator in the movement of loads. Dogging operations requires a High Risk Work Licence

DOGGING COURSE

*$595

*for students eligible for funding under the Construction Skills Queensland (CSQ) program initiative

Courses available fortnightly

Call now while funding is still available

CPCCLDG3001A Licence to perform dogging

Dogging operations covers work in conjunction with cranes using slinging techniques, selection and inspection of lifting gear and directing the crane operator in the movement of loads. Dogging operations requires a High-Risk Work Licence (HRWL) issued by Work Place Health and Safety QLD (WHSQ). Ascent Training Solutions has developed a high-quality detailed training course that prepares you to perform dogging operations with a high importance on safety.Contact us today to start the process in obtaining your dogman ticket.

Our nationally accredited Dogging course is designed to give you the knowledge and skills necessary, in selecting appropriate lifting gear when moving loads in various situations. This course is based on the Safe Work Australia’s National Standard for Licensing Persons conducting high-risk work.

There are two main aspects involved in dogging. The first involves moving a load using slinging techniques and the second involves the directing of a hoist or crane operator when the load is out of the operator’s full view.

The training in its current form meets the criteria stated in the state and territory licensing and unit of competency requirements.

The detailed course material will help you to plan a job, select and inspect the appropriate equipment, prepare the site and equipment, perform the task and finally to complete the task in a safe manner and document any issues if necessary. This will be taught by our highly qualified trainers through written and practical teachings at our on-site training facility in Brisbane. The course material will include;

  • Hazard control measures and risk assessment regarding the slinging and directing of loads.
  • Selecting and inspecting the appropriate lifting gear, and communication and personal. protective equipment according to procedures and site instructions.
  • Ensure the correct attachments are used for lifting.
  • Isolation procedures and documentation when reporting faulty equipment.
  • Effective use of communication such as hand signals, whistles, and two-way radios along with good communication skills with supervisors and co-workers.
  • Estimating and measuring loads using mathematical procedures.
  • Relevant OHS legislation, standards, and codes of practice.

The successful candidate will have the knowledge and ability to conduct the following;

  • Effectively communicate with supervisors and co-workers in a safe working environment.
  • Apply hazard control methods and risk assessment measures according to site procedures.
  • Comply with all OHS legislation and standards applicable to dogging operations.
  • Ability to use various attachments such as ropes, hitches and sheet bends.
  • Understanding the appropriate uses and limitations of lifting gear and slinging techniques.
  • Conduct before and after operational checks, isolate any equipment that has been damaged and reports accordingly.
  • Inspect and maintain all lifting equipment according to manufacturer’s instructions.
  • Basic knowledge of various cranes including the tower, portal boom, slewing mobile and derrick cranes to name a few.
  • Understand mathematical calculations for measuring loads

On successful completion of this course, you will be issued with a nationally recognized Statement of Attainment for the unit of competency CPCCLDG3001A Licence to perform dogging, which enables you to be eligible to apply for the HRWL license through Workplace Health and Safety Queensland (WHSQ).

A dogging license is a basis to a potential career in the Rigging industry. Once you have successfully completed this course, you are eligible to undertake a Basic Rigging Course followed by the Intermediate Rigging and on to an Advanced Rigging course. The DG Class HRWL enables you to gain employment in various industries including construction, mining, offshore drilling and more.

We operate our dogging courses are run on a regular basis. If you would like to secure your spot on the next course, please contact our bookings team on bookings@ascent.edu.au or alternatively call 07 5658 0040

This is a 5-day course involving high quality face to face training at our training facility in Pinkenba, QLD.

Onsite training and assessing is available at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the WHSQ requirements for assessment.

There are no pre-requisites for this course however, to undertake formal assessment and obtain a HRWL you must be at least 18 years of age and be proficient (read and write) with basic English.

You will also be required to produce 3 forms of identification which should include a current photo ID. ID requirements can be found at https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity )

We would also require the candidates to wear basic PPE such as hi-vis, safety helmet, boots (preferably steel capped) and wear sun protection during the training.

Any medical problems or health conditions are required to disclosed before training commences.

A $200 non-refundable booking fee is to be paid prior to the course to secure your spot. Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonored transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life high-risk jobs.

On successful completion:

  • You will be issued a Statement of Attainment for CPCCLDG3001A Licence to perform dogging making you eligible for a DG class HRWL license.
  • LHRW Assessment Summary – AS1 form to apply for your High-Risk Work Licence through Workplace Health and Safety Queensland
  • Industry knowledge and skills to perform dogging operations.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

DOGGING COURSE

CPCCLDG3001A Licence to perform dogging

Dogman Ticket Brisbane

Dogging operations cover work in conjunction with cranes using slinging techniques, selection and inspection of lifting gear and directing the crane operator in the movement of loads. Dogging operations requires a High-Risk Work Licence (HRWL) issued by Work Place Health and Safety QLD (WHSQ). Ascent Training Solutions has developed a high-quality detailed training course that prepares you to perform dogging operations with a high importance on safety.

License to perform dogging is a high-risk license course and covers the scope of work required to demonstrate competency in applying slinging techniques, selection and inspection of lifting gear and/or the directing of the crane/operator in the movement of the load.

Dogman Ticket Brisbane

Dogman Ticket Brisbane

This dogging course is based upon the National Standard for Licensing Persons Performing High-Risk Work.

The course content includes:

 

  • Job planning
  • Select and inspect equipment
  • Prepare site and equipment
  • Perform task
  • Shut down job and clean up

 

Please click here to download a pdf copy of the complete course outline.

 

On successful completion of this course, you will be awarded a nationally recognized Licence and Statement of Attainment CPCCLDG3001A Licence to perform dogging.

Navigate here to get more information about Scaffolding Course Brisbane

Other Related Courses are:

Rigging Training Brisbane , Scaffolding Training Brisbane, Dogman Course Gold Coast

WATER CART

Water Cart Operations

Water Cart Operations

Construction Skills Queensland (CSQ) funding available*

RIIMPO326D Conduct civil construction water cart operations
(superseded by and equivalent to RIIMPO326E)

Our nationally recognized water cart or also known as water truck operations course will give you the knowledge and skills to operate a water cart in the civil construction industry. Water cart operations are undertaken on work sites for a variety of reasons, the training – whether on-site or at our training yard – will meet the needs of your site or the simulated site requirements to adhere to project plans and environmental requirements. The use of a water cart often involves working in conjunction with other plant operators to ensure successful operations on site.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

Our nationally recognized water cart operations course is designed to provide you with the skills and knowledge necessary to operate a water cart across many industries in Australia especially, mining and construction operations. At Ascent Training Solutions, our flexible trainers provide a detailed training plan for students in a small class environment.

The training in its current form meets the criteria of the unit of competency requirements.

A water cart is primarily used on construction sites for dust control, compaction, irrigation, and road construction. It consists of a tank with a sprinkler mounted on the front, side or back. Due to Australia’s climate, a water cart is essential on work sites for dust management to prevent environmental hazards and more importantly the risk to people’s health.

This unit of competency will provide you with the necessary skills to plan and prepare the work, drive the water cart, conduct all operational checks, transport and distribute the water efficiently, maintain the machine and record any defects and perform the relevant housekeeping duties.

All aspects of this course are vital in preparing you for the safe operations of a water cart. Our highly skilled and knowledgeable trainers will provide you with the necessary training through written and practical teachings at our onsite facility in Brisbane. We can also provide training at an outside location provided all relevant equipment is available.

This unit of competency will include the following;

  • Compliant documentation relevant to water cart operations
  • The importance of risk and hazard controls specially for dust management
  • Effective traffic management planning
  • Routine operational checks and shut down procedures
  • Operating a water cart safely and efficiently
  • How to fill the water cart and transport and distribute water in an efficient manner
  • Maintain equipment and report faults according to isolation procedures
  • Effective written and verbal communication and reporting procedures
  • Housekeeping duties including the disposal and recycling of materials

Once training has been completed, the successful candidate will have the ability to display the following;

  • Document water cart operations in compliance with company policies and procedures
  • Comply with relevant Australian standards, legislation and codes of practice within the workplace
  • Conduct pre-start and shut down checks of the watercart and record defects if necessary
  • Operate the watercart and make necessary adjustments due to site conditions
  • Identify risks and hazards associated with water cart operations specifically dust management.
  • Understand soil types and the importance of compaction due to a moisture content
  • Recognize the characteristics and capabilities of the various water pumps and water distribution systems
  • Communicate effectively with co-workers and supervisors to ensure the work is completed in a timely manner
  • Perform earthworks and safe working load calculations

On successful completion of this course, Ascent Training Solutions will issue you with a nationally recognized Statement of Attainment and operator’s card that will allow you to safely operate a water cart across many work sites within Australia.

Ascent Training Solutions will give you the confidence and assurance necessary to gain employment in a variety of industries, especially the construction and mining industries.

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high-quality face to face and logbook training.

Onsite training and assessing are available at your company location, however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

The full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonored transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in a student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognized Statement of Attainment
  • Personalized wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a water cart

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

WATER CART OPERATIONS

Visit here to get more information about Dogman Ticket Brisbane

Other Related Courses are:

Rigging Courses Brisbane, Dogman Course Brisbane, Scaffolding Course Brisbane

DOZER OPERATIONS

Dozer Operations

Dozer Operations

Construction Skills Queensland (CSQ) funding available*

RIIMPO323D Conduct civil construction dozer operations
(superseded by and equivalent to RIIMPO323E)

Our nationally recognized dozer course will give you the knowledge and skills to operate a dozer in the civil construction industry. The training will allow you to work with the heavier aspects of earth moving such as earthworks in the civil or mining industries. Completing this course could see you working on high rise construction projects to pushing stockpiles in quarries.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

Our nationally recognized Dozer course is designed to provide students with the necessary skills and knowledge to safely operate a dozer within the civil construction industry.

At Ascent Training Solutions, we provide a detailed training plan for students in a small class environment and in some cases one-on-one. This gives you the maximum amount of time with our highly qualified trainers to ensure you get hands-on real-world skills to meet the highest standards of safety and compliance in the construction industry.

The training in its current form meets the criteria of the unit of competency requirements.

Dozers, also known as bulldozers are a heavy duty machine similar to a tractor, equipped with a blade at the front and in most cases have a claw like a tool attached to the rear. The blade is used to move large quantities of materials such as sand and soil whereas the claw on the back is for loosening compacted materials. There are many different types of dozers available depending on the task to be undertaken including crawler dozers, wheeled dozers and mini dozers in Brisbane, the latter suited best for residential construction.

This unit of competency will provide you with the necessary training on how to plan a job, operate a dozer and conduct operational and shutdown checks, select and fit appropriate attachments for the specified job, relocation and maintenance of the dozer and keeping a clean worksite.

The training will be taught by our highly qualified trainers at Ascent Training Solutions at our onsite training facility in Brisbane through written and practical teachings. The course content will cover the following;

  • Documentation of dozer operations in compliance with appropriate standards and procedures.
  • How to operate a dozer and understanding their limitations and capabilities.
  • Hazards, risks and environmental issues and measures used to control them.
  • Personal protective equipment.
  • Traffic management plans including relevant signage.
  • Operational before and after checks for the dozer.
  • Effective communication in the workplace.
  • Isolation procedures when reporting defective equipment.

On successful completion of this course, applicants will have the ability to demonstrate the following;

  • Comply with relevant Australian standards, codes of practice and site-specific instructions.
  • Conduct before and after checks of the dozer.
  • Identify potential hazards and apply safe work practices.
  • Ability to select and fit the appropriate attachments for various jobs.
  • Complete tasks efficiently such as spreading topsoil, stockpiling, cutting drains, backfilling and other civil construction duties.
  • Safe working load and earthworks calculations
  • Various communication techniques necessary for the efficient completion of a job.

On successful completion of this course, Ascent Training Solutions will issue you with a nationally recognized Statement of Attainment and operator card that will allow you to safely operate a dozer in a variety of work environments.

Our highly skilled and knowledgeable trainers at Ascent Training Solutions will give you the support and guidance required to gain employment across numerous sectors including construction and mining.

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high-quality face to face and logbook training.

Onsite training and assessing is available at your company location, however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

The full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonored transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in a student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognized Statement of Attainment
  • Personalized wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a dozer.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

Please click here to download a pdf of the complete course outline.

Visit here to get more information about Water Cart Operations

Other Related Courses are:

Rigging Courses Brisbane, Dogman Course Brisbane, Scaffolding Course Brisbane

TELESCOPIC HANDLER

TELESCOPIC MATERIALS HANDLER OPERATIONS

TELESCOPIC MATERIALS HANDLER OPERATIONS

Construction Skills Queensland (CSQ) funding available*

RIIHAN309E Conduct telescopic materials handler operations
(superseded by and equivalent to RIIHAN309F)

The Telescopic Materials Handler or Telehandler course is nationally recognized, giving you the skills to operate a telehandler in the civil construction industry. The training will also allow you to use this versatile machinery for lifting and carrying materials in a range of industries including mining and agriculture industries.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

Our telescopic materials handler operations course, also known as a Telehandler will provide students with the skills and knowledge necessary to operate a telehandler within the construction and agricultural industries. At Ascent Training Solutions, we provide a detailed training plan for students in a small class environment and in some cases on a one-to-one basis.

The training in its current form meets the criteria of the unit of competency requirements.

A telehandler is a vehicle with a telescopic boom, fitted with a lifting attachment that can extend forwards and upwards. A telehandler can have several different attachments on the end of the boom including a bucket, forks, muck grab or winch making it an extremely versatile lifting machine.

This course will give you detailed training on how to plan and prepare a job, conduct pre-start and operational checks, choose appropriate attachments when transferring loads, shut down procedures, maintenance of the machine, relocation of the telehandler and finally keeping a clean work area.

All of these activities will be taught by our highly qualified trainers through written and practical teachings at our on-site training facility in Brisbane. The course material will include the following;

  • Hazards, risks and environmental issues associated with telehandler operations
  • Operating a telehandler using safe operating techniques
  • Appropriate personal protective equipment for the various work tasks
  • Pre-start, operational and shut-down procedures associated with the telehandler
  • Importance of communication in the workplace specifically with the Dogman
  • Effective communication procedures such as signage, hand signals and written instructions
  • Safe working load calculations to avoid workplace hazards
  • The various attachments available and their uses.
  • Site-specific traffic management plans.

On successful completion of this unit, the candidate will have the skills to demonstrate the following;

  • Record and maintain both written and verbal requirements relevant to the operations and procedures of the telehandler.
  • Compute safe working loads and basic earth work calculations.
  • Recognise the characteristics, capabilities and limitations of the telehandler.
  • Conduct operational checks and report any faults accordingly.
  • Select appropriate attachments and lifting gear for the task being carried out.
  • Relocate the telehandler between work sites in conjunction with traffic management procedures.
  • Ability to work effectively with co-workers, supervisors and all other employees in the workplace and ensure appropriate methods of communication with the dogman are adhered to.
  • Understand the requirements of the relevant Health and Safety organisations, regulations and safe working procedures.

All aspects of this course are vital in completing your Telehandler training. On successful completion of this course, Ascent Training Solutions will issue you with a nationally recognised Statement of Attainment that will allow you to operate a telehandler across many work sites within Australia.

Our highly accredited trainers and accessors Ascent Training Solutions will ensure you receive the highest level of training necessary to gain employment in various sectors specifically the Construction and Agricultural industries.

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available at your company location however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognised Statement of Attainment
  • Personalised wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a telehandler.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

TELESCOPIC HANDLER OPERATIONS

Please click here to download a pdf of the complete course outline.

Browse here to get more information about Dozer Operations

 

Other Related Courses are:

Rigging Courses Brisbane, Dogman Course Brisbane, Scaffolding Course Brisbane

FRONT END LOADER

Our front end loader (FEL) course is nationally recognized, giving you the skills to operate an FEL in the civil construction industry. The training will also qualify you for earthmoving jobs in the mining, construction and agriculture industries

Front End Loader

Front End Loader

Construction Skills Queensland (CSQ) funding available*

RIIMPO321E Conduct civil construction wheeled front end loader operations
(superseded by and equivalent to RIIMPO321F)

Our front end loader (FEL) course is nationally recognized, giving you the skills to operate a FEL in the civil construction industry. The training will also qualify you for earth moving jobs in the mining, construction and agriculture industries.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors Brisbane will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

The purpose of the Front End Loader course is to provide you with the competency to operate a front end loader in many sectors including the civil construction, mining and agricultural industries. At Ascent Training Solutions, our highly skilled trainers and assessors provide a detailed training plan for students in a small class environment.

A front end loader is a heavy equipment machine with a bucket at the front on an articulated arm. It can be used in construction for digging and loading various materials such as rock, sand, asphalt, pipe or gravel onto trucks. The bucket can both be permanently mounted or have a removable attachment where it can be replaced by another device or tool.

This training in its current form, meets the criteria of the unit of competency requirements.

This course will give you detailed training on how to plan and prepare work, operate a front end loader, select and attach appropriate lifting gear, move a load safely, conduct routine checks, relocate the front end loader, maintain and inspect the loader, and finally to perform housekeeping tasks.

The training will be taught at our onsite training facility in Brisbane through written and practical teachings. The course content will cover the following;

  • Australian standards, legislation and codes of practice.
  • Procedures and techniques to follow when operating a front end loader.
  • Routine pre-start checks and shut down procedures.
  • Hazard identification and the relevant control measures.
  • The various front end loader attachments for transferring loads effectively.
  • Understanding the characteristics, capabilities and limitations of a loader
  • Identifying and reporting faults according to isolation procedures.
  • Effective communication between employees in the workplace.
  • Characteristics of materials/soils being moved and choosing the right attachment for the specific job
  • Relocation of the front end loader between worksites.
  • General housekeeping tasks and maintenance of the machine.

On successful completion of this course, applicants will have the ability to demonstrate the following;

  • Identify hazards and apply control measures using the Hierarchy of Hazard Control
  • Conduct before and after routine checks to ensure the front end loader is safe to use.
  • Use effective communication skills with supervisors and co-workers.
  • Use of appropriate signals when transporting materials safely.
  • Choose the correct attachments for the specific work being carried out.
  • Backfilling, cutting/boxing, mixing materials and various other techniques when operating a front end loader.
  • Knowledge of the different types of soil and their compaction.
  • Calculate safe working loads.
  • Report faulty equipment according to site isolation procedures.
  • Comply with the relevant legislation, safety standards and site instructions.

On successful completion of this course, you will have the ability to safely operate a front end loader in a variety of different work environments. Ascent Training Solutions will issue you with a nationally recognised statement of attainment, which enables you to work in many industries across the country.

Our highly qualified trainers and assessors will provide students with the confidence and assurance necessary to gain employment in a variety of industries specifically the construction and mining sectors,

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available at your company location however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognised Statement of Attainment
  • Personalised wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a wheeled front end loader.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

FRONT END LOADER OPERATIONS

Please click here to download a pdf copy of the complete course outline.

Discover here to get more information about Telescopic Handler

Other Related Courses are:

Riggers Ticket Brisbane, Dogman Ticket Brisbane, Scaffolding Ticket Brisbane

ROLLER OPERATIONS

Roller Operations

Roller Operations

Construction Skills Queensland (CSQ) funding available*

RIIMPO317E Conduct roller operations
(superseded by and equivalent to RIIMPO317F)

Conduct roller operations is a nationally recognized course that will give you the skills to operate a roller on a construction or building site. The training will also qualify you for jobs in the transport, mining, construction and agriculture industries.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

The purpose of our nationally recognised Roller Operations course is to provide you with the skills and knowledge necessary to operate a roller onsite across multiple industries. At Ascent Training Solutions, our highly skilled trainers provide a detailed training plan for students in a small class environment.

This training in its current form, meets the criteria of the unit of competency requirements.

Rollers are used for compacting materials through vibration, impact loading, kneading, and direct pressure. Depending on the project and the materials to be compacted, there are a variety of different rollers that can be used such as a cylindrical roller, a smooth wheeled roller, a vibratory roller to name a few.

Operating a roller involves planning and preparing roller operations, carrying out machine operating checks and maintenance, relocating the roller, and finally cleaning up.All aspects of this course will be taught at our training facility in Brisbane through written and practical teachings. The course details will include the following;

  • How to operate a roller and select appropriate attachments
  • Understand the different roller types and their characteristics
  • Hazards, risks and environmental issues associated with all aspects of roller operations
  • Appropriate personal protective equipment and emergency procedures
  • Traffic management plan including signage requirements
  • Conduct before, after and shut-down operational checks of the roller
  • Relocation of the roller and relevant traffic management requirements
  • Maintenance and clean up procedures of the roller and work area
  • Isolation procedures and documentation of defective plant and equipment.
  • Understand manufacturer's specifications and work instructions.
  • Mathematical calculations relevant to the roller

The successful candidate will have the ability to demonstrate the following when operating a roller;

  • Record and maintain information regarding all roller procedures and operations.
  • Effectively communicate with supervisors and co-workers in the workplace and ensure the use of proper signs and barriers.
  • Identify hazards, apply the necessary control measures and report accordingly.
  • Understand the various soil types, compaction and ground conditions.
  • Identify levelling and compacting techniques and use the appropriate attachments to complete the job.
  • Recognise the capabilities and limitations of the roller
  • Interpret site drawings and plans, and perform earthwork calculations
  • Ensure all plant and equipment faults are verified and dealt with in an appropriate manner.
  • Comply with all safety legislation, Australian standards and site specific documentation relevant to the operations of a roller.

On successful completion of this course, you will have the ability to operate a range of different rollers in compliance with all relevant safety legislation. You will be issued with a nationally recognised statement of attainment, which will allow you to operate a roller on numerous worksites across Australia.

Ascent Training Solutions detailed training course will confidently prepare you for various employment roles within the construction, mining, agricultural industries and beyond.

Depending on prior knowledge and experience, our courses are run over 3 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available onsite at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Depending on prior knowledge and experience, our courses are run over 3 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available onsite at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognised Statement of Attainment
  • Personalised wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a Roller.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

ROLLER OPERATIONS

SKID STEER LOADER OPERATIONS

Skid Steer/Bobcat Operations

Skid Steer/Bobcat Operations

Construction Skills Queensland (CSQ) funding available*

RIIMPO318E Conduct civil construction skid steer loader operations
(superseded by and equivalent to RIIMPO318F)

Our skid steer or also known as a bobcat loader operations course is a nationally recognized training program that will give you the skills to operate a skid steer/bobcat in the civil construction industry. The training will also qualify you for earth moving jobs in the mining, construction and agriculture industries.

Our industry Trainers and Assessors in Brisbane will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

The purpose of the Skid Steer/bobcat course is to provide you with the skills and knowledge necessary to operate a skid steer in multiple sectors specifically construction and landscaping. At Ascent Training Solutions, our flexible trainers provide a detailed training plan for students in a small class environment.

This training in its current form meets the criteria of the unit of competency requirements.

A skid-steer loader is a small compact rigid-framed machine comprising of lift arms used to attach a wide range of tools and attachments. The main advantage of this type of loader is its manoeuvrability and size as it can be used in domestic work such as landscaping and driveways.

This course will give you detailed training on how to plan and prepare work, operate a skid steer loader, conduct routine checks, relocate the skid steer loader, maintain the loader and finally to perform housekeeping tasks. The training will be taught at our onsite training facility in Brisbane through written and practical teachings. Included in the course details are the following;

  • Components and controls of a skid steer loader.
  • Operating a skid steer loader and knowing their characteristics, capabilities and limitations.
  • Hazard identification and control measures
  • Routine checks and shut down procedures
  • Reporting faults and isolation procedures
  • Safety instructions including work method statements, material safety data sheets and emergency procedures
  • Characteristics of materials/soils being moved and choosing the right attachment for the specific job
  • Transferring loads safely by using relevant lifting gear and communication signals.
  • Mathematical calculations for estimating work loads.
  • Relocation of the skid steer between worksites
  • Clean up of the work area and maintenance of the machine

On successful completion of this course, applicants will have the ability to demonstrate the following;

  • Identify hazards and apply control measures using the Hierarchy of Hazard Control
  • Conduct before and after routine checks to ensure the skid steer is safe to use, refer to the logbook for previous faults
  • Interpret site plans and charts and calculate safe working loads
  • Use effective interpersonal communication skills with supervisors and co-workers in the work place.
  • Effective communication techniques including hand signals and other designated signals.
  • Choose the correct attachments for the specific work being carried out
  • Backfilling, spreading materials, excavating and many other techniques used when operating a skid steer loader.
  • Report defective plant and equipment and isolate according to site procedures.
  • Comply with the relevant legislation, safety standards and site instructions regarding the operations of a skid steer loader.

On successful completion of this course, you will have the ability to safely operate a skid steer loader in a variety of different work environments. You will be issued with a nationally recognised statement of attainment allowing you to safely operate a skid steer loader across many worksites in Australia.

Ascent Training Solutions will give you the confidence and assurance necessary to gain employment in a variety of industries ranging from civil construction jobs to much smaller domestic jobs and more.

Depending on prior knowledge and experience, our courses are run over 3 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available onsite at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available at your company location however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognised Statement of Attainment
  • Personalised wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate a skid steer/bobcat.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au

SKID STEER OPERATIONS

EXCAVATOR

Excavator Operations

Excavator Operations

Construction Skills Queensland (CSQ) funding available*

RIIMPO320E Conduct civil construction excavator operations
(superseded by and equivalent to RIIMPO320F)

Our excavator operations course is nationally recognized giving you the skills to operate an excavator in the civil construction industry. The training will also qualify you for earth moving jobs in the mining, construction and agriculture industries.

Our industry Trainers and Assessors will provide you with high quality, flexible and reliable training, giving you hands-on real-world skills to meet the highest standards of safety and compliance in the industry. Our trainers and assessors in Queensland will ensure you are site ready and have the necessary skills and knowledge to safely and efficiently undertake work in a range of working environments.

Verification of Competency (VOC) courses also available.

Our nationally recognised Excavator Operations course will provide you with the necessary skills to operate an excavator across many sectors including the civil construction, mining and agricultural industries.

This training in its current form, meets the criteria of the unit of competency requirements.

An excavator is a self-propelled tracked or wheeled vehicle, that can move a minimum of 360 degrees with an upper structure. This is performed through movement of a bucket fitted to the boom where the machine can excavate, lift, swing and discharge materials.

This unit of competency will teach you how to operate an excavator by planning and preparing for excavator operations, using the appropriate attachments to transfer materials, relocating the excavator, conducting maintenance checks and finally undertaking housekeeping tasks.All aspects of this course will be taught at our training facility in Brisbane through written and practical teachings. The course content will include, but is not limited to;

  • Operating an excavator using the appropriate attachments and knowing their characteristics, capabilities and limitations.
  • Transferring loads safely by using relevant lifting gear and communication signals.
  • Potential hazards, risks and environmental issues and the measures used to control them.
  • Emergency procedures including fire, evacuation, first aid and material safety data sheets.
  • Mathematical calculations for estimating work loads.
  • Conduct operational checks and report faulty plant and equipment in accordance with isolation procedures.
  • Relocation of the excavator between work-sites and the appropriate traffic management requirements
  • Housekeeping activities and maintenance of the excavator
  • Understand manufacturer's specifications, work instructions and site plans

On successful completion of this course, applicants will be competent in carrying out the following duties;

  • Calculate safe working loads and interpret site information such as structural charts and plans.
  • Identify hazards and risks and apply safe work practices.
  • Document information regarding excavator procedures and operations.
  • Knowledge of the different soil types and compaction for civil construction
  • Effectively communicate with everyone in the workplace and ensure proper use of visual communication including signs and barriers.
  • How to choose the correct attachment for the work being carried out.
  • Various techniques used to complete civil works such as boxing and cutting, backfilling, stock piling, trench excavation and many more.
  • Follow isolation procedures when dealing with defective equipment and report accordingly
  • Comply with the relevant Australian standards, codes of practice and site instructions.

On completion of the Excavator Operations course, the successful applicant will acquire the skills to safely operate an excavator in various situations that arise within the civil construction industry.

Ascent Training Solutions will issue you with a nationally recognised Statement of that will allow you to operate an excavator in many worksites within Australia.

Our highly skilled trainers and assessors at Ascent Training Solutions will provide you with the confidence and assurance necessary to gain future employment in civil construction and beyond.

Depending on prior knowledge and experience, our courses are run over 2 - 5-days involving high quality face to face and logbook training at our training yard in Brisbane.

Onsite training and assessing is available at your company location however, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the requirements for assessment.

Full course fee is to be paid prior to the commencement of formal assessment.

Payment plans are available through Humm formally known as Certegy Ezi-Pay, contact us for further details.

All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonoured transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.

You can find more information about our booking process, enrolment and payment policies in student handbook.

Refund Policy

Kindly refer to our student handbook for more information on our refund policy.

Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life construction jobs.

On successful completion:

  • You will be issued a nationally recognised Statement of Attainment
  • Personalised wallet sized Operators Card with the unit of competency listed
  • Industry knowledge and skills to operate an excavator.

Subsidies are available for eligible candidates through Construction Skills Queensland (CSQ). CSQ is an independent industry-funded body supporting employers, workers, apprentices and career seekers in the building and construction industry. CSQ provides funding for QLD based eligible workers as specified in the Building and Construction industry (portable Log Service Leave Act 1991 (link to https://www.legislation.qld.gov.au/view/pdf/inforce/current/act-1991-090 )

More information regarding subsidised training courses and eligibility can be found here (link Here to https://ascenttrainingsolutions.com.au/construction-skills-queensland-csq-courses/.)

For further information you can contact us on (07) 5658 0040 or email us at enquiries@ascent.edu.au