C2 CRANE COURSE
C2 CRANE COURSE
Courses available monthly
TLILIC3008 Licence to operate a slewing mobile crane (up to 20 tonnes)(superseded)
A Slewing mobile crane is a mobile crane that incorporates a boom or jib that can be slewed. This course is suitable for one who intends to operate a slewing crane up to 20 tonnes in the mining, construction, offshore drilling industries and more. It is also a great stepping stone to further your skills and training into operations with heavier tonne loads, such as C6 crane training (up to 60-tonne crane operations). Operating this crane requires a High-Risk Work Licence (HRWL) issued by Workplace Health and Safety QLD.
Our C2 Class training course will provide you with the correct skills and knowledge to conduct operations using a slewing mobile crane up to 20 tonnes in conjunction with Safe Work Australia’s National Standard for licensing persons that are conducting work of high risk.
This training course meets the criteria that are stated in the state and territory licensing and unit of competency requirements.
A slewing crane lifts its load followed by suspending that load in mid-air and then rotates it using rotating equipment such as a boom or jib.
This course is suitable for one who intends to operate a slewing crane up to 20 tonnes in the mining, construction, offshore drilling industries and more. It is also a great stepping stone to further your skills and training into operations with heavier tonne loads, such as C6 crane training (up to 60-tonne crane operations).
This course provides you with knowledge and skills on how to operate a slewing crane up to 20 tonnes. The course includes the following aspects, but are not limited to;
- Conducting pre and post checks
- Crane Set up
- Ability to identify hazards and risks
- Apply relevant calculations in conjunction with lift plan and load charts
- Applying relevant crane movements including; luffing, catching load swing, slewing and telescope
- Determining and defects or faults with the operation of the crane
- Completing appropriate documentation
- Communication methods including 2-way radio, hand signals, and whistles
Our course is taught through written and practical lessons at our easily accessible site located very close to Brisbane airport. The elements mentioned above are extremely important when operating a slewing crane up to 20 tonnes and in order to achieve the unit of competency.
On successful completion of this course, you will receive a nationally recognized statement of attainment which makes you eligible to apply for a High-Risk Work Licence through Workplace Health and Safety Queensland.
Successful candidates will be able to conduct operations using a slewing crane up to 20 tonnes and have the knowledge and skills to conduct the following elements outlined below.
- Record and maintain information accurately relating to all crane procedures and operations.
- Use of effective communication techniques in the workplace that include hand signaling and whistles.
- Use Effective interpersonal communication skills with other personnel in the workplace.
- Load appropriate data.
- Conduct operations using a slewing mobile crane up to 20 tonnes for elevating and moving loads in a safe manner.
- Application of Risk assessments and hazard control strategies.
- Interpret the crane manufacturers data and specifications that include load charts to ensure that the crane can be configured for the load.
- To ensure problems and equipment faults are verified and dealt with in an appropriate manner.
There are no pre-requisites for this crane course however, you must be 18 years or older to partake in the assessment.
Accordion Sample This is a 5-day course involving high quality face to face training at our training facility in Pinkenba, QLD.
Onsite training and assessing are available at your company location. However, in such cases, we would conduct an inspection of the equipment that will be used to ensure the safety and conditions of the equipment is ideal for on-site training and meets the WHSQ requirements for assessment. Description
There are no pre-requisites for this course however, to undertake formal assessment and obtain an HRWL you must be at least 18 years of age and be proficient (read and write) with basic English.
You will also be required to produce 3 forms of identification which should include a current photo ID. ID requirements can be found at https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity )
We also require the candidates to wear basic PPE such as hi-vis, safety helmet, boots (preferably steel capped) and wear sun protection during the training.
Any medical problems or health conditions are required to disclose before training commences.
A $200 non-refundable booking fee is to be paid prior to the course to secure your spot. Full course fee is to be paid prior to the commencement of formal assessment.
Payment plans are available through Certegy Ezi-Pay, contact us for further details.
All payments can be made using Direct Debit, Visa, or Mastercard. In the case of a failed payment or dishonored transaction, the enrolment of the candidate will be suspended. In such cases, you can seek a transfer to another course.
You can find more information about our booking process, enrolment and payment policies in the student handbook.
Kindly refer to our student handbook for more information on our refund policy.
Our focus is not limited to providing you with industry knowledge and developing the required skills. We ensure you have the confidence and capability to apply the knowledge and skills to real life high-risk jobs.
On successful completion:
- You will be issued a Statement of Attainment for TLILIC3008 Licence to operate a slewing mobile crane (up to 20 tonnes) making you eligible for a C2 class HRWL license.
- LHRW Assessment Summary – AS1 form to apply for your High-Risk Work Licence through Workplace Health and Safety Queensland
- Industry knowledge and skills to operate a slewing mobile crane up to 20 tonnes